A warm device can turn your favorite flavor into a harsh experience. If your gear is getting too hot, you’re not getting the smooth hit you deserve. Don’t sweat it; a solution is here.

Here are no-fuss ways to protect your device and improve every puff from your Geekvape Aegis Boost.

Regularly wipe out your device:

Dust and sticky e-liquid can clog your device. This makes it work harder and get hotter. Use a cotton swab to gently clean the area where the pod connects. Wipe the outside of your device regularly. A clean device runs much cooler.

Check your coil:

Your coil is the heart of the device. An old or worn-out coil has to work extra hard to heat up. This creates a lot of excess heat. If your vape starts tasting burnt or the device gets warm quickly, it is probably time for a new coil. A fresh coil works efficiently and stays cooler.

Give it a break:

Chain vaping is taking many puffs in a row. This does not give your coil time to cool down between uses. The heat builds up, making the entire device hot. Try to take short breaks between puffs. This simple habit gives the coil a moment to rest and cool off.

Always keep a device in a cool place:

Never leave your device in a hot car or in direct sunlight. High temperatures are bad for the battery and the device itself. Always store your vape in a cool, dry place. Your pocket or a bag away from the sun is a much better spot.

Use the right battery:

If your device uses an external battery, always use the ones recommended for it. A poor quality or damaged battery can cause serious heat problems. Ensure your batteries have no tears in the wrapping. Good batteries are safe and produce heat correctly.

Care for your coil:

A dry coil is a hot coil. Before you use a new coil, always add a few drops of e-liquid directly onto the cotton. Then, let the filled pod sit for five to ten minutes. This process is called priming. It soaks the wick so it burns the e-liquid evenly, preventing dry burns and excess heat.